Wholesale for Replacement Atlas Copco Parts Built-in Oil Filter Element 1622314200 1625840100 1622460180

Hydraulic oil filtration is through physical filtration and chemical adsorption to remove impurities, particles and pollutants in the hydraulic system. It usually consists of a filter medium and a shell.

The filtration medium of hydraulic oil filters usually uses fiber materials, such as paper, fabric or wire mesh, which have different filtration levels and fineness. When the hydraulic oil passes through the filter element, the filter medium will capture the particles and impurities in it, so that it cannot enter the hydraulic system.

The shell of the hydraulic oil filter usually has an inlet port and an outlet port, and the hydraulic oil flows into the filter element from the inlet, is filtered inside the filter element, and then flows out of the outlet. The housing also has a pressure relief valve to protect the filter element from failure caused by exceeding its capacity.

Oil filter replacement standard:

1. Replace it after the actual use time reaches the design life time. The design life of the oil filter element is usually 2000 hours. It must be replaced after expiration. Secondly, the oil filter has not been replaced for a long time, and the external conditions such as excessive working conditions may cause damage to the filter element. If the surrounding environment of the air compressor room is harsh, the replacement time should be shortened. When replacing the oil filter, follow each step in the owner's manual in turn.

2. When the oil filter element is blocked, it should be replaced in time. The oil filter element blockage alarm setting value is usually 1.0-1.4bar.