Wholesale Air Compressor Parts Oil Separator Filter Products 100007587 Air Compressor Spare Parts Filter

Tips：Because there are more 100,000 types of air compressor filter elements, there may be no way to show one by one on the website, please email or phone us if you need it.

There are two commonly used oil and gas separation filters: built-in and external. When the gas entering the separator from the outlet of the air compressor flows through the interior of the separator, due to the slowing of the flow rate and the change of direction, the lubricating oil and impurities in the gas lose their suspension state and begin to precipitate. The special structure and design inside the separator can effectively collect and separate these precipitated lubricants and impurities, and clean gases continue to flow out of the separator for subsequent process or equipment use. High quality oil and gas separation ensures efficient operation of the compressor and the life of the filter element can reach thousands of hours. If the use of oil and gas separation filters is prolonged, it will lead to increased fuel consumption, increased operating costs, and may even lead to the failure of the main engine. Therefore, when the pressure difference of the separator filter element reaches 0.08 ~ 0.1Mpa, the filter element must be replaced.

Precautions when installing the oil and gas separator filter element

1. Apply a small amount of lubricating oil on the surface of the seal when installing the oil and gas separator filter element.

2. During installation, the filter element of the rotary oil and gas separator only needs to be tightened clockwise by hand.

3. When installing the built-in oil and gas separator filter element, a conductive plate or graphite gasket must be installed on the flange gasket of the oil and gas separator filter element.

4. When installing the built-in oil and gas separator filter element, pay attention to whether the return pipe extends to the center bottom of the oil and gas separator filter element between 2-3mm.

5. When unloading the filter element of the oil and gas separator, pay attention to whether there is still excess pressure inside.

6. The compressed air containing oil cannot be directly injected into the filter element of the oil and gas separator.