To filter oil in an air compressor, follow these steps:
1. Turn off the air compressor and disconnect the power supply to prevent accidental startup.
2. Locate the oil filter housing on the compressor. Depending on the model and design, it may be on the side or top of the compressor.
3. Using a wrench or suitable tool, carefully remove the oil filter housing cover. Be careful as the oil inside the housing may be hot.
4. Remove old oil filter from housing. Discard properly.
5. Thoroughly clean the oil filter housing to remove excess oil and debris.
6. Install new oil filter into housing. Make sure it fits securely and is the right size for your compressor.
7. Replace the oil filter housing cover and tighten with a wrench.
8. Check the oil level in the compressor and top up if necessary. Use the recommended oil type specified in the compressor manual.
9. After completing all maintenance tasks, reconnect the air compressor to the power source.
10. Start the air compressor and let it run for a few minutes to ensure proper oil circulation.
When performing any maintenance tasks on an air compressor, including filtering oil, it is important to follow the manufacturer’s recommendations and guidelines. Regularly changing the oil filter and keeping the oil clean will significantly improve the efficiency and life of the compressor.
Xinxiang Jinyu company’s products are suitable for CompAir, Liuzhou Fidelity, Atlas, Ingersoll-Rand and other brands of air compressor filter element, the main products include oil, oil filter, air filter, high efficiency precision filter, water filter, dust filter, plate filter, bag filter and so on. We keep good quality and competitive price to ensure our customers benefit . We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from. Welcome to contact us!!
Post time: Sep-19-2023