Wholesale Atlas Copco oil separator compressor Replace 2906056500 2906075300 2906056400

Short Description:

Total Height（mm)：540

Largest Inner Diameter（mm)：264

Outer Diameter（mm)：350

Largest Outer Diameter（mm)：595

Weight（kg）：17.04

Packaging Details：

Inner package :Blister bag / Bubble bag/ Kraft paper or as customer’s request.

Outside package :Carton wooden box and or as customer’s request.

Normally, the inner packaging of the filter element is a PP plastic bag, and the outer packaging is a box. The packaging box has neutral packaging and original packaging. We also accept custom packaging, but there is a minimum order quantity requirement.

Send email to us

Product Detail

Product Tags

Product Description

The oil and gas separator is a key component responsible for removing oil particles before compressed air is released into the system. The first layer of the oil and gas separation filter is usually the pre-filter, which traps larger oil droplets and prevents them from entering the main filter. The pre-filter extends the service life and efficiency of the main filter, allowing it to operate optimally. The main filter is usually a coalescing filter element, which is the core of the oil and gas separator. As air flows through these fibers, oil droplets gradually accumulate and merge to form larger droplets. These larger droplets then settle down due to gravity and eventually drain into the separator's collecting tank.The design of the filter element ensures that the air passes through the maximum surface area, thus maximizing the interaction between the oil droplets and the filter medium. Maintenance of the oil and gas separation filter is essential to ensure its proper operation. The filter element must be checked and replaced regularly to prevent clogging and pressure drop.

The basic steps of air compressor oil production are as follows

Step 1: Prepare raw materials

The main components of air compressor oil are lubricating oil and additives. The selection of lubricating oil should be selected according to different application environments and use requirements. The additives also need to be selected according to different performance requirements.

Step 2: Mix

According to the specific formula, the lubricating oil and additives are mixed in a certain proportion, while stirring and heating to make it fully mixed.

Step 3: Filter

Filtration is a key step in ensuring product quality. The mixture of lubricating oil and additives needs to go through a specific filtration process to remove impurities and particles in order to ensure a clean and uniform product.

Step 4: Separation

The mixture is centrifuged to separate lubricating oils and additives of different densities.

Step 5: Packing

The oil content of the air compressor can meet the needs of different automobiles and machinery. The produced oil will be packaged, stored and transported in an appropriate way to ensure that its quality and performance are not affected.

Previous: Factory Direct Price screw air compressor spare parts oil separator filter 1616465600

Next: Factory Price Ingersoll Rand Filter Element Replace 54749247 Centrifugal Oil Separator for Screw Air Compressor